Beam Diagnostics

As soon as the first particles emerge from an ion source, the source characteristics need to be determined. The total beam intensity, the transverse particle distributions, the beam divergence and emittance as well as the longitudinal parameters of the beam must be measured. This chapter provides an overview of typical measurement methods and the instruments used, and shows the results obtained.

Note:

12 pages, contribution to the CAS-CERN Accelerator School: Ion Sources, Senec, Slovakia, 29 May - 8 June 2012, edited by R. Bailey, CERN-2013-007

activity report
measurement methods
beam monitoring
ion: particle source
beam profile: transverse
beam emittance

References(7)

Figures(0)

[1]

Lecture notes on beam diagnostics, Joint University Accelerator School (JUAS), March

P. Forck

[1]

available at

- http://www-bd.gsi.de/conf/juas/juas_script.pdf

[2]

First results from beam measurements at the 3 MeV test stand for CERN Linac4, Proc. DIPAC, Hamburg, Germany

B. Cheymol

[3]

Pulsed ECR source in afterglow operation at CERN

C.E. Hill
(
- CERN
)
,
K. Langbein
(
- CERN
)

- Rev.Sci.Instrum. 67 (1996) 1328-1330
•
DOI:
- 10.1063/1.1146709

[4]

Low-energy emittance studies with the new SNS Allison emittance scanner, Proc. PAC09, Vancouver, BC, Canada

M.P Stöckli

[5]

Ionization profile monitors - IPM at GSI, Proc. DIPAC, Hamburg, Germany

T. Giacomini

[6]

Beam induced fluorescence (BIF) monitors as standard operating tool, Proc. DIPAC, Hamburg, Germany

C.A. Andre