Design of a 10 MeV normal conducting CW proton linac based on equidistant multi-gap CH cavities

Continuous wave (CW) high current proton linacs have wide applications as the front end of high power proton machines. The low energy part of such a linac is the most difficult and there is currently no widely accepted solution. Based on the analysis of the focusing properties of the CW low energy proton linac, a 10 MeV low energy normal conducting proton linac based on equidistant seven-gap Cross-bar H-type (CH) cavities is proposed. The linac is composed of ten 7-gap CH cavities and the transverse focusing is maintained by quadrupole doublets located between the cavities. The total length of the linac is less than 6 meters and the average acceleration gradient is about 1.2 MeV/m. The electromagnetic properties of the cavities are investigated by Microwave Studio. At the nominal acceleration gradient the maximum surface electric field in the cavities is less than 1.3 times the Kilpatrick limit, and the Ohmic loss of each cavity is less than 35 kW. Multi-particle beam dynamics simulations are performed with Tracewin code, and the results show that the beam dynamics of the linac are quite stable, the linac has the capability to accelerate up to 30 mA beam with acceptable dynamics behavior.

Note:

9pages, 8figures and two tables

References(17)

Figures(0)

[1]

Accelerator Driven Sub-critical System, Institute of Physics Publishing Bristol and Philadelphia

Nifenecker H

[2]

A reference accelerator scheme for ADS applications

Biarrotte J.L

- Nucl.Instrum.Meth.A 562 (2006) 656-661

[3]

Report CERN-AT-93-47 (ET), CERN/LHC/96-01 (EET)

Carminati F

[4]

Pierini, ADS Reliability Activities in Europe, OECD Nuclear Energy Agency, International workshops on Utilization and reliability of high power proton accelerators(HPPA): 4th meeting, May 16-19, Daejon, Report of Korea

[5]

High intensity proton SC linac using spoke cavities. Proceedings of EPAC, Paris, France. 1010

Biarrotte J

[6]

Production of 325MHz single spoke resonators at FNAL. Proceedings of PAC07, Albuquerque, New Mexico, USA. 2262

Lanfranco G

[7]

Results of two beta=0.175 350MHz 2gap spoke cavities. Proceedings of theParticle Accelerator Conference. 1341

Tajima T

[8]

Conceptual design of a Low-beta SC proton Linac. Proceedings of theParticle Accelerator Conference, Chicago. 3293

Garnett R

[9]

Zhihui Li, The focusing Properties of Both Normal and Sperconducting Low Energy CW Proton Linacs. Proceedings of SAP

[10]

- http://irfu.cea.fr/Sacm/logiciels/index3.php

[11]

Design of the R.T. CH-cavity and Perspectives for a New GSI Proton Linac. Proceedings of LINAC04, Luebeck, Germany. p81

Z. Li

[12]

Physics design of an accelerator for an accelerator-driven subcritical system

et al.

- Phys.Rev.ST Accel.Beams 16 (2013) 8, 080101
•
DOI:
- 10.1103/PhysRevSTAB.16.080101

[13]

- https://www.cst.com/

[14]

Error analysis and lattice improvement for the C-ADS Injector-Ⅰ China Physics

C. Meng

[14]

38 (6): 067008

[15]

MEBT2 physics design for the C-ADS Master Thesis, University of Chinese Academy of Sciences,(In Chinese)

Z. Guo

[16]

Jinhai LI, private communication