A compact linear accelerator based on a scalable microelectromechanical-system RF-structure

A new approach for a compact radio-frequency (RF) accelerator structure is presented. The new accelerator architecture is based on the Multiple Electrostatic Quadrupole Array Linear Accelerator (MEQALAC) structure that was first developed in the 1980s. The MEQALAC utilized RF resonators producing the accelerating fields and providing for higher beam currents through parallel beamlets focused using arrays of electrostatic quadrupoles (ESQs). While the early work obtained ESQs with lateral dimensions on the order of a few centimeters, using a printed circuit board (PCB), we reduce the characteristic dimension to the millimeter regime, while massively scaling up the potential number of parallel beamlets. Using Microelectromechanical systems scalable fabrication approaches, we are working on further reducing the characteristic dimension to the sub-millimeter regime. The technology is based on RF-acceleration components and ESQs implemented in the PCB or silicon wafers where each beamlet passes through beam apertures in the wafer. The complete accelerator is then assembled by stacking these wafers. This approach has the potential for fast and inexpensive batch fabrication of the components and flexibility in system design for application specific beam energies and currents. For prototyping the accelerator architecture, the components have been fabricated using the PCB. In this paper, we present proof of concept results of the principal components using the PCB: RF acceleration and ESQ focusing. Ongoing developments on implementing components in silicon and scaling of the accelerator technology to high currents and beam energies are discussed.

accelerator RF systems
linear accelerators
micromechanical devices
particle beam bunching
printed circuits

References(23)

Figures(10)

[1]

ITER project and fusion technology

H. Takatsu

- Nucl.Fusion 51 (2011) 094002
•
DOI:
- 10.1088/0029-5515/51/9/094002

[2]

Status of the ITER heating neutral beam system

R. Hemsworth
,
H. Decamps
,
J. Graceffa
,
B. Schunke
,
M. Tanaka

et al.

- Nucl.Fusion 49 (2009) 045006
•
DOI:
- 10.1088/0029-5515/49/4/045006

[3]

Laser compression of matter to super-high densities: Thermonuclear (CTR) applications

J. Nuckolls
,
L. Wood
,
A. Thiessen
,
G. Zimmerman

- Nature 239 (1972) 139-142
•
DOI:
- 10.1038/239139a0

[4]

Accelerators for inertial fusion energy production

R.O. Bangerter
,
A. Faltens
,
P.A. Seidl

- Sci.Technol. 06 (2013) 85-116
•
DOI:
- 10.1142/s1793626813300053

[5]

The fundamental parameter space of controlled thermonuclear fusion

I.R. Lindemuth
,
R.E. Siemon

- Am.J.Phys. 77 (2009) 407
•
DOI:
- 10.1119/1.3096646

[6]

Magneto-inertial fusion

G.A. Wurden
,
S.C. Hsu
,
T.P. Intrator
,
T.C. Grabowski
,
J.H. Degnan

et al.

•
DOI:
- 10.1007/s10894-015-0038-x

[7]

Integrated all-electric high energy ion beam guidance on chip: Towards miniature particle accelerator

Y. Shi
,
A. Lal

[8]

Space-charge limits for linear accelerators

A. Maschke

[9]

Energy from inertial fusion

W.J. Hogan
,
R. Bangerter
,
G.L. Kulcinski

- Phys.Today 45 (1992) 42-50
•
DOI:
- 10.1063/1.881319

[10]

Development of electrostatic quadrupoles for heavy ion fusion

A. Faltens
,
P. Seidl

[11]

Electrical breakdown in atmospheric air between closely spaced (0.2 μm-40 μm) electrical contacts

P.G. Slade
,
E.D. Taylor

•
DOI:
- 10.1109/tcapt.2002.804615

[12]

New progress of high current gasdynamic ion source (invited)

V. Skalyga
,
I. Izotov
,
S. Golubev
,
A. Sidorov
,
S. Razin

et al.

- Rev.Sci.Instrum. 87 (2016) 02
•
DOI:
- 10.1063/1.4934213

[13]

Development and testing of a pulsed helium ion source for probing materials and warm dense matter studies

Q. Ji
,
P.A. Seidl
,
W.L. Waldron
,
J.H. Takakuwa
,
A. Friedman

et al.

- Rev.Sci.Instrum. 87 (2016) 02
•
DOI:
- 10.1063/1.4932569

[14]

High current beam extraction from the 88-inch cyclotron at LBNL

D.S. Todd
,
J.Y. Benitez
,
M.K. Covo
,
K.Y. Franzen
,
C.M. Lyneis

et al.

[15]

RF linear accelerators

Thomas P. Wangler
(
- Michigan State U.
)

- Weinheim, Germany: Wiley-VCH (2008) 450 p

[16]

An energy resolution formula of a three plane grids retarding field energy analyzer

Y. Sakai
,
I. Katsumata

•
DOI:
- 10.1143/jjap.24.337

[17]

A compact filament-driven multicusp ion source

Y. Lee
,
R. Gough
,
W. Kunkel
,
K. Leung
,
L. Perkins

et al.

- Nucl.Instrum.Meth.B 119 (1996) 543-548
•
DOI:
- 10.1016/s0168-583x(96)00623-4

[18]

High current density beamlets from a rf argon source for heavy ion fusion applications

J.W. Kwan
,
D.P. Grote
,
G.A. Westenskow

- Rev.Sci.Instrum. 75 (2004) 1838-1840
•
DOI:
- 10.1063/1.1699517

[19]

Design and simulation of a multibeamlet injector for a high current accelerator

- Phys.Rev.ST Accel.Beams 6 (2003) 014202
•
DOI:
- 10.1103/PhysRevSTAB.6.014202

[20]

Drift compression and final focus options for heavy ion fusion

H. Qin
,
R.C. Davidson
,
J.J. Barnard
,
E.P. Lee

- Nucl.Instrum.Meth. 544 (2005) 255-261
•
DOI:
- 10.1016/j.nima.2005.01.214

[21]

Comparison of two types of low-β RF linacs: MEQALAC and RFQ

W.H. Urbanus
,
R.G.C. Wojke
,
J.G. Bannenberg
,
H. Klein
,
A. Schempp

et al.

- Nucl.Instrum.Meth. 290 (1990) 1-10
•
DOI:
- 10.1016/0168-9002(90)90340-c

[22]

The SNS front-end commissioning

A. Ratti
,
J. Ayers
,
L. Doolittle
,
R. DiGennaro
,
R.A. Gough

et al.

Published by AIP Publishing