1.25 GHz sine wave gating InGaAs/InP single-photon detector with a monolithically integrated readout circuit
Nov 7, 20174 pages
Published in:
- Opt.Lett. 42 (2017) 24, 5090-5093
- Published: Dec 5, 2017
e-Print:
- 1711.02796 [quant-ph]
DOI:
View in:
Citations per year
Abstract: (OSA Publishing)
InGaAs/InP single-photon detectors (SPDs) are the key devices for applications requiring near-infrared single-photon detection. The gating mode is an effective approach to synchronous single-photon detection. Increasing gating frequency and reducing the module size are important challenges for the design of such a detector system. Here we present for the first time, to the best of our knowledge, an InGaAs/InP SPD with 1.25 GHz sine wave gating (SWG) using a monolithically integrated readout circuit (MIRC). The MIRC has a size of 15 mm×15 mm and implements the miniaturization of avalanche extraction for high-frequency SWG. In the MIRC, low-pass filters and a low-noise radio frequency amplifier are integrated based on the technique of low temperature co-fired ceramic, which can effectively reduce the parasitic capacitance and extract weak avalanche signals. We then characterize the InGaAs/InP SPD to verify the functionality and reliability of the MIRC, and the SPD exhibits excellent performance with 27.5% photon detection efficiency, a 1.2 kcps dark count rate, and 9.1% afterpulse probability at 223 K and 100 ns hold-off time. With this MIRC, one can further design miniaturized high-frequency SPD modules that are highly required for practical applications.Note:
- 4 pages, 5 figures. Accepted for publication in Optics Letters
- Photon counting
- Quantum key distribution
- Single photon avalanche diodes
- Single photon detectors
- Subwavelength gratings
- Systems design
References(37)
Figures(5)