High-speed fluorescent thermal imaging of quench propagation in high temperature superconductor tapes

Fluorescent microthermographic imaging, a method using rare-earth fluorescent coatings with temperature dependent light emission, was used for quench investigation in high temperature superconductors (HTS). A fluorophore was embedded in a polymer matrix and used as a coating on top of an HTS tape, while being excited with UV light and recorded with a high-speed camera. Simultaneously, the tape was pulsed with high amplitude, short duration DC current, and brought to quench with the help of a localised defect. The Joule heating during a quench influences the fluorescent light intensity emitted from the coating, and by recording the local variations in this intensity over time, the heating of the tape can be visualised and the developed temperatures can be calculated. In this paper, the fluorophore europium tris[3-(trifluoromethylhydroxymethylene)-(+)-camphorate] (EuTFC) provided sufficient temperature sensitivity and a usable temperature range from 77–260 K. With the help of 2500 image captures per second, the normal zone development was imaged in a 20 μm copper stabilised HTS tape held in a liquid nitrogen bath, and using a calibration curve, the temperatures reached during the quench have been calculated.

References(26)

Figures(8)

[1]

Superconductors in the Power Grid (Amsterdam:

Rey C

[2]

High Temperature Superconductors (HTS) for Energy Applications (Woodhead Publishing Series in Energy) (Amsterdam:

Melhem Z

[3]

Applications of High Temperature Superconductors to Electric Power Equipment (Hoboken, NJ:

Kalsi S. S

•
DOI:
- 10.1002/9780470877890

[4]

Applications of High-Tc Superconductivity A Moysés Luiz (eds.)

Luiz A. M
,
Özdemir Z. G
,
Çataltepe A
,
Onbal Ü
,
Lee G-J

et al.

•
DOI:
- 10.5772/2522

[5]

High Field Magnets with HTS Conductors

et al.

- IEEE Trans.Appl.Supercond. 20 (2010) 3, 576-582
•
DOI:
- 10.1109/TASC.2010.2043080

[6]

Stability measurements on YBCO coated conductors

Armenio A. A

- IEEE Trans.Appl.Supercond. 18 (2008) 1293-6
•
DOI:
- 10.1109/TASC.2008.920835

[7]

Stability and quench behavior of YBa2Cu3O7-x coated conductor at 4.2 K, self-field

Song H
,
Schwartz J

- IEEE Trans.Appl.Supercond. 19 (2009) 3735-43
•
DOI:
- 10.1109/TASC.2009.2023674

[8]

Quench propagation ignition using single-mode diode laser

Trillaud F
,
Ayela F
,
Devred A
,
Fratini M
,
Leboeuf D

et al.

- IEEE Trans.Appl.Supercond. 15 (2005) 3648-51
•
DOI:
- 10.1109/TASC.2005.849381

[9]

Numerical and experimental analysis of normal zone propagation on 2G HTS wires

Pelegrín J
,
Martínez E
,
Angurel L. A
,
Xie Y. Y
,
Selvamanickam V

- IEEE Trans.Appl.Supercond. 21 (2011) 3041-4
•
DOI:
- 10.1109/TASC.2010.2084982

[10]

Near-adiabatic quench experiments on short near-adiabatic quench experiments on short YBa2Cu3O7-δ coated conductors

Wang X
,
Trociewitzj P
,
Schwartz J

- J.Appl.Phys. 101 (2008) 053904
•
DOI:
- 10.1063/1.2435804

[11]

Normal zone propagation velocity in 2G HTS coated conductor with high interfacial resistance

Lacroix C
,
Fournier-Lupien J. H
,
McMeekin K
,
Sirois F

- IEEE Trans.Appl.Supercond. 23 (2013) 3-7
•
DOI:
- 10.1109/TASC.2013.2239696

[12]

High normal zone propagation velocity in second generation high-temperature superconductor coated conductors with a current flow diverter architecture

Lacroix C
,
Lapierre Y
,
Coulombe J
,
Sirois F

- Supercond.Sci.Technol. 27 (2014) 055013
•
DOI:
- 10.1088/0953-2048/27/5/055013

[13]

Remote thermal imaging with 0.7-&mgr

Kolodner P
,
Tyson J. A

[13]

m spatial resolution using temperature-dependent fluorescent thin flims

- Appl.Phys.Lett. 42 117-9
•
DOI:
- 10.1063/1.93766

[14]

Microscopic fluorescent imaging of surface temperature profiles with 0.01 C resolution

Kolodner P
,
Tyson J. A

- Appl.Phys.Lett. 40 (1982) 782-4
•
DOI:
- 10.1063/1.93258

[15]

High resolution thermal imaging of hotspots in superconducting films

Haugen O
,
Johansen T. H
,
Chen H
,
Yurchenko V
,
Vase P

et al.

- IEEE Trans.Appl.Supercond. 17 (2007) 3215-8
•
DOI:
- 10.1109/TASC.2007.899341

[16]

Temperature dependent photoluminescence down to 4.2 K in EuTFC

Haugen Ø
,
Johansen T

- J.Lumin 128 (2008) 1479-83
•
DOI:
- 10.1016/j.jlumin.2008.02.007

[17]

Assessment of commercial fluorescent paints on their applicability to the cryogenic thermography system Advances in Cryogenic Engineering: Trans. of the Cryogenic Engineering Conf. vol 823 pp 441-8, Crossref:

Nara K
,
Yamada N
,
Kato H

•
DOI:
- 10.1063/1.2202446

[18]

Assessment of cryogenic thermography system using commercial fluorescent paints on their applicability to visualization of normal-zone propagation in YBCO coated conductor

Ishiyama A
,
Tsuchiya M
,
Ueda H
,
Shiohara Y

- IEEE Trans.Appl.Supercond. 17 (2007) 3765-8
•
DOI:
- 10.1109/TASC.2007.899124

[19]

Dynamic magneto-optical imaging of transport current redistribution and normal zone propagation in YBa2Cu3O7-δ coated conductor

Song H
,
Davidson M. W
,
Schwartz J

- Supercond.Sci.Technol. 22 (2009) 062001
•
DOI:
- 10.1088/0953-2048/22/6/062001

[20]

Quench detection in YBa2Cu3O7-δ coated conductors using interferometric techniques

Angurel L. A
,
Martínez E
,
Lera F
,
Recuero S
,
Andrés N

et al.

- J.Appl.Phys. 104 (2008) 093916
•
DOI:
- 10.1063/1.3013884

[21]

High power failure of superconducting microwave filters: investigation by means of thermal imaging

Hampel G

- Appl.Phys.Lett. 69 (1996) 571-3
•
DOI:
- 10.1063/1.117790

[22]

Mouser ElectronicsLED Engin LZ1 UV 365nm LEDs, www.mouser.co.uk/new/ledengin/led-engin-lz1-365nm-emitters/:

[23]

Fluorescent microthermographic imaging Proc. 20th Int. Symp. for Testing and Failure Analysis pp 87-95

Barton D. L

[24]

Influence of different surface treatments on the heat flux from solids to liquid nitrogen

Hellmann S
,
Noe M

- IEEE Trans.Appl.Supercond. 24 (2014) 0501605
•
DOI:
- 10.1109/TASC.2013.2283772

1-25 of 26
1
2
25 / page