literature
Literature
Authors
Jobs
Seminars
Conferences
DataBETA

Drawing WS2 thermal sensors on paper substrates

Oct 24, 2020
e-Print:
DOI:
View in:
pdf
reference search0 citations

Citations per year

0 Citations
Abstract: (arXiv)
Paper based thermoresistive sensors are fabricated by rubbing WS2 powder against a piece of standard copier paper, like the way a pencil is used to write on paper. The abrasion between the layered material and the rough paper surface erodes the material, breaking the weak van der Waals interlayer bonds, yielding a film of interconnected platelets. The resistance of WS2 presents a strong temperature dependence, as expected for a semiconductor material in which charge transport is due to thermally activated carriers. This strong temperature dependence makes the paper supported WS2 devices extremely sensitive to small changes in temperature. This exquisite thermal sensitivity, and their fast response times to sudden temperature changes, is exploited thereby demonstrating the usability of a WS2-on-paper thermal sensor in a respiration monitoring device.
Note:
  • 6 main text figures, 1 table, 6 supp. info. figures
  • [1]
    Kavli Institute of Nanoscience, Delft University of Technology, Lorentzweg 1, 2628 CJ Delft, The Netherlands
    • [2]
      Materials Science Factory. Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, E-28049, Spain
      • [3]
        Nanophysics research Lab., Department of Physics. University of Tehran, Tehran 14395, Iran. andres.castellanos@csic.es Comparison between the performance of WS2 and graphite on-paper thermoresistive devices Measurements on different WS2 devices Optical characterization of the WS2 film on paper Raman characterization of the graphite electrode drawn on top of the films Characterization of the electrical properties of a WS2 film on paper Resistance vs. temperature of device shown in Figure
        • [4]
          in log scale Comparison between the performance of WS2 and graphite on-paper thermoresistive devices