literature
Literature
Authors
Jobs
Seminars
Conferences

Performance Analyses of the Newly Developed Operational Amplifier aRD820

Nov 13, 2024
e-Print:
View in:
pdf
reference search0 citations

Citations per year

0 Citations
Abstract: (arXiv)
Operational amplifiers are critical components in modern analog electronics, widely used across applications such as signal conditioning, instrumentation, voltage regulation, and analog-to-digital conversion. This paper presents the design, development, and evaluation of the aRD820, a low-power, rail-to-rail operational amplifier, as a cost-effective alternative to the industry-standard AD820. The aRD820 is optimized for operation on a single supply voltage ranging from 5 to 30 V or a dual supply of +-2.5 V to +-15 V. Key design objectives included achieving low voltage noise (< 4 uV peak-to-peak from 0.1 to 10 Hz), ultra-low input bias current (< 15 pA), and a low offset voltage (< 500 uV), making it suitable for high-sensitivity applications. In adapting the AD820 design, RD Alfa Microelectronics addressed specific production constraints by modifying key circuit elements to meet the specifics of available production facilities. The modified input stage reduced noise by incorporating source followers, enhancing the allowable input signal range. Adjustments to the second and output stages improved phase stability and gain characteristics. Extensive testing of the aRD820 in both wafer form and TO-5 packaged chips confirmed that the amplifier meets or exceeds planned specifications. Comparative results demonstrate that the aRD820 provides open-loop gain, offset voltage stability, and output saturation voltages comparable to those of the AD820. Noise measurements yielded values within the planned range, with an input noise density of approximately 13.5 - 18.1 nV/Sqrt(Hz), suitable for applications requiring precision signal processing. This paper provides a comprehensive overview of the design modifications and test results, establishing the aRD820 as a viable alternative to existing op-amps in similar applications.
  • [1]
    for Analog Signal Processing: Classification, Review, and New Proposals
    • Biolek D.
      ,
    • Senani R.
      ,
    • Biolkova V.
      ,
    • Kolka Z. Active Elements
      • Radioeng. 17 (2008) 15-32
  • [2]
    Operational Amplifiers: Design and Applications, New York:
    • Tobey G. E.
      ,
    • Graeme J. G.
      ,
    • Huelsman L. P.
  • [3]
    Applications Handbook. Amsterdam:
    • Jung W. Op Amp
  • [4]
    Op-Amp for Video Applications,Second International Conference on Intelligent Computing and Control Systems (ICICCS),, pp. 494-498
    • Radha S.
      ,
    • Nagabushanam P.
      ,
    • Nikhil K.
      ,
    • Jose B.
      ,
    • Jose L. High Speed
  • [5]
    operational amplifier with rail-to-rail input and output ranges
    • Huijsing J. H.
      ,
    • Linebarger D. Low-voltage
      • IEEE J.Solid State Circuits 20 (1985) 1144-1150
  • [6]
    Low‐voltage rail‐to‐rail CMOS operational amplifier design. Electronics and Communications in Japan (Part II:
    • Yukizaki Y.
      ,
    • Kobayashi H.
      ,
    • Myono T.
      ,
    • Suzuki T.
      ,
    • Zhao N.
      • Electronics 89 (2006) 1-7
  • [7]
    performance analysis of bipolar operational amplifier based on the noise matrix superposition expression. IEE Proceedings - Circuits, Devices and Systems, vol. 145, no. 5,, pp. 343-346
    • Dai Y. Noise
  • [8]
    and modelling of operational amplifier power supply rejection
    • Brinson M. E.
      ,
    • Faulkner D.J. Measurement
      • Int.J.Electron. 78 (1995) 667-678
  • [9]
    amplifier input stage robust to EMI
    • Fiori F. Operational
      • Electron.Lett. 37 (2001) 930-931
  • [10]
    effects of radio-frequency interference in operational amplifiers. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, vol. 49, no. 3,, pp. 367-372
    • Fiori F.
      ,
    • Crovetti P.S. Nonlinear
  • [11]
    Long-term behavior of operational amplifiers
    • Rubiola E.
      ,
    • Francese C.
      ,
    • de Marchi A.
      • IEEE Trans.Instrum.Measur. 50 (2001) 89-94
  • [12]
    adaptive biasing CMOS Operational Amplifier with enhanced DC-Gain,Ph.D. Research in Microelectronics and
    • Dalena F.
      ,
    • Giannini V.
      ,
    • Baschirotto A.A. Low-Power
      • Electronics 2006 (2006) 165-168
  • [13]
    enhancement of advanced recycling folded cascode operational transconductance amplifier using an unbalanced biased input stage
    • Khade A. S.
      ,
    • Vyas V.
      ,
    • Sutaone M. Performance
      • Integration 69 (2019) 242-250
  • [14]
    and multigate transistors based wide-band OTA buffer amplifiers for heavy resistance load. Facta Universitatis - Series: Electronics and Energetics, vol. 35, no. 1,, pp. 13-28
    • Jayachandran R.
      ,
    • Jagalchandran D.
      ,
    • Subramaniam P.C. Planar CMOS
  • [15]
    procedure for two-stage CMOS opamp with flexible noise-power balancing scheme
    • Mahattanakul J.
      ,
    • Chutichatuporn J. Design
      • IEEE Trans.Circ.Syst. 52 (2005) 1508-1514
  • [16]
    Hasan Md. M., Jang J. A High Performance
    • Rahaman A.
      ,
    • Chen Y.
  • [17]
    of operational amplifier’s power supply rejection ratio effects, The Ten International Scientific and Applied Science Conference, ELECTRONICS-ET,, pp. 3-10
    • Shoikova E.
      ,
    • Pandiev I. Macromodeling
  • [18]
    Improved SPICE Macromodels of Instrumentation Amplifier with PSRR Effect, ELECTRONICS’, September 19-21,, Sozopol, Bulgaria, pp. 3-10
    • Shoikova E.D.
      ,
    • I.M. Pandiev
  • [19]
    and Simulation Modeling of Programmable Circuits Using Digital Potentiometers. International Journal of Microelectronics and
    • Pandiev I.M. Analysis
      • Comput.Sci. 5 (2014) 127-135
  • [20]
    the results of measurements of operational amplifier parameters.International Siberian Conference on Control and Communications (SIBCON), May 21-23,, Omsk, Russia, pp. 1-3
    • Svetlov A. V.
      ,
    • Sapunov E.V. Processing
  • [21]
    Lu J
    • Lei L.
      ,
    • Huang J.
      ,
    • Yang F.
      ,
    • Shang L.
      ,
    • Zeng X. Automatic Op-Amp
      • IEEE Trans.Comput.Aided Design Integr.Circuits Syst. 42 (2023) 4378-4390
  • [22]
    Amplifier using Artificial Neural Network
    • Yogesh G.
      ,
    • Gaidhane V.H. Design of Operational
  • [23]
    Single-supply, rail-to-rail, low power, FET input op amp, AD8200, Analog Devices, Inc. [online] [04.10..]. Available at:
  • [24]
    TL08xx FET-Input Operational Amplifiers, Texas Instruments. [online][04.10..] Available at:
  • [25]
    ADA4522-1/ADA4522-2/ADA4522-4, 55 V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-toRail Output Operational Amplifiers, Analog Devices, Inc., [online][04.10..]. Available at:
  • 1-25 of 28
  • 1
  • 2
  • 25 / page